The European Huawei Honor 3C (H30-U10) is officially receiving the final B306 Android 4.4.2 update (V100R001C432B306) based on Emotion UI 3.0 over the air. But instead of waiting for the OTA to arrive you can download the full firmware below and easily flash it over your existing Jelly Bean system.
- Device: Honor 3C
- Model: H30-U10
- Android: v4.4.2 KitKat
- EMUI: 3.0
- Firmware: B306
- Build Number: V100R001C432B306
- Required Version: B109/B110/B111
- Date: 16-07-2015
- Region: Europe
- Status: Official
- Type: Full firmware image
- File Name: H30-U10_V100R001C432B306.zip
- Size: 867 MB
How to Install
This firmware is only recommended the European Honor 3C with C432Bxxx market number (not C900Bxxx) running one of the following Jelly Bean builds:
Step 1: You need to be running stock Android 4.2.2 Jelly Bean OS with unmodified recovery. The bootloader should also be locked – root should be fine though!
Step 2: Download “H30-U10_V100R001C432B306.zip” from above and extract Update.app from it.
Step 3: Copy this Update.app package to your external SD card. It should be formatted in FAT32 filesystem.
Step 4: Make a backup of your existing data through the built-in utility or SP Flash Tool. A complete nandroid backup created through a custom recovery like TWRP.
Step 5: Now initiate the upgrade from Settings > Updates > System Updates > Local Update. Your device should automatically reboot, verify the package and flash it.
Step 6: [Optional] After the reboot, unlock the bootloader again and reflash your important stuff like TWRP and SuperSU.
Step 7: In case you’re unable to access Local Update, you can flash this firmware by forced SD upgrade method. Turn your phone off and reboot while holding Vol up + Vol down + Power until you are directed to the stock recovery. It’ll just take a few minutes to flash the package.
Like this post? Use the buttons below to share this article with your friends on Facebook, Google Plus and Twitter.