You can now download the full B388 Nougat update for the European Huawei Honor 8 variants (FRD-L09 & FRD-L19) using the direct download links provided below. This beta update improves system stability & performance and applies this month’s security patches from Google.
Firmware Details
1. FRD-L09
- Device: Huawei Honor 8
- Model: FRD-L09
- Android: 7.0 (Nougat)
- Version:Â NRD90M
- EMUI: 5.0
- Firmware: B388
- Build Number:Â FRD-L09C432B388
- Security Patch Level: May 5, 2017
- Status: Official (beta)
- Type: Full firmware image
- Region: Europe
- Release Date: 25.05.2017
- File Name: update.zip
Download Link: Official Mirror | Size: 1.3 GB
Cust Package: Official Mirror | Size: 731 MB
Public Data Package: Official Mirror | Size: 401 MB
2. FRD-L19
- Device: Huawei Honor 8
- Model: FRD-L19
- Android: 7.0 (Nougat)
- Version:Â NRD90M
- EMUI: 5.0
- Firmware: B388
- Build Number:Â FRD-L19C432B388
- Security Patch Level: May 5, 2017
- Status: Official (beta)
- Type: Full firmware image
- Region: Europe
- Release Date: 25.05.2017
- File Name: update.zip
Download Link: Official Mirror | Size: 1.3 GB
Cust Package: Official Mirror | Size: 731 MB
Public Data Package: Official Mirror | Size: 401 MB
How to Update
Note: Your device should already be running a C432 (Europe) based firmware onboard before the installation of this firmware. As this is a beta firmware, you may not be able to install it using the stock recovery or even TWRP. Proceed at your own risk!
- Make sure your phone already has a custom recovery like TWRP installed with an unlocked bootloader.
- Verify your phone’s model number from Settings > About Phone and then download the appropriate update.zip, cust and public data files from the links provided above.
- Transfer the 3 zip packages to your phone’s internal memory or SD card and then turn the device off.
- Now, hold Volume up + Power simultaneously for a few seconds until the device boots into TWRP.
- In TWRP, take a full backup of all the partitions and store it in the SD card.
- You’re recommended that you perform a factory reset before proceeding (Warning: this will wipe out the internal memory).
- Next, go to Install, locate the update.zip package and confirm its installation.
- After that, install the other two zip files the same way.
- When you’re done, return to the main screen and reboot into the system.
Like this post? Hit the share buttons below to share this article with your friends on Facebook, Google+ and Twitter.