Huawei P10 (VTR-L09) has received a new B137 Nougat update in European countries via OTA. This firmware version brings improvements to Camera performance, touchscreen sensitivity and system stability. You can download and install this firmware on your manually by following the tutorial provided here.
- Device: Huawei P10
- Model: VTR-L09
- Android: 7.0 (Nougat)
- Version: NRD90M
- EMUI: 5.1
- Firmware: B137
- Build Number: VTR-L09C432B137
- Security Patch Level: May 5, 2017
- Status: Official (beta)
- Type: Full firmware package
- Release Date: 23.05.2017
- Region: Europe
- File Name: update.zip
Compatibility: Before installing this update, verify your phone’s model from Settings > About Phone. Your device already needs to be running a C432 based firmware with unlocked bootloader.
Step 1. Connect your phone to the PC in mass storage mode and create a new folder “HWOTA” in the top-level directory of its external microSD card.
Step 2. Download and rename the zip files provided above and copy them to the new HWOTA folder in your microSD card.
Step 3. Download the Huawei P10 Updater tool from here and extract the HWOTA folder from the zip package on the Desktop.
Step 4. Unplug the USB cable from your phone and turn it off. Then insert the USB cable again while holding the Volume down key – this will start the phone in fastboot mode.
Step 5. Now, open the extracted HWOTA folder on your computer and execute the update.bat file as administrator (Windows only).
Step 6. The updater tool will ask you to reboot the phone in fastboot mode. Since you’ve already done that (step 4), hit Enter key to continue.
Step 7. After replacing your phone’s stock recovery, the program will tell you to reboot into TWRP mode – Simply disconnect the USB cable, power the device off and then hold Volume up + Power for a few seconds until you’re in TWRP recovery.
Step 8. Now, reconnect the USB cable and press the Enter key (twice) on your computer.
Step 9. You’ll now be asked to choose the update source. Type 1 and press Enter.
Step 10. Next, for update type selection, type 1 and hit the Enter key twice.
Step 11. If you’ve done everything correctly, your phone should automatically reboot and start the update installation.
That’s all! Feel free to ask any questions in the comments section below in case you encounter any issues.
Like this post? Hit the share buttons below to share this article with your friends on Facebook, Google+ and Twitter.