The official B151 Nougat update for European Huawei P10 (VTR-L29) variant can now be downloaded using the direct link provided here. This update features Android security patch level of May 5, 2017.
Firmware Details
- Device: Huawei P10
- Model: VTR-L29
- Android: 7.0 (Nougat)
- Version:Â NRD90M
- EMUI: 5.1
- Firmware: B151
- Build Number:Â VTR-L29C432B151
- Security Patch Level: May 5, 2017
- Status: Official (beta)
- Type: Full firmware OTA
- Release Date: 2.06.2017
- Region: Europe
- File Name: update.zip
Download Links
- Update.zip: Official Mirror | Size: 2.0 GB
- Public Data Package: Official Mirror | Size: 135 MB |Â Rename to update_data_public.zip after downloading
- Cust Package: Official Mirror | Size: 604 MB |Â Rename to update_all_hw.zip
How to Update
Note: Confirm your phone’s model from Settings > About Phone before proceeding. Your device already needs to be on a C432 (Europe) firmware with unlocked bootloader.
Step 1. Connect your phone to the computer via a USB cable and create a new folder “HWOTA” (without quotes, of course) in the top directory of the external SD card.
Step 2. Download and rename the zip files provided above and transfer them to the HWOTA folder you created in the microSD card.
Step 3. Download the Huawei P10 updater script from this link and extract the HWOTA folder from it on the Desktop.
Step 4. Disconnect the USB cable turn your phone off. After that, reinsert the USB cable again while holding the Volume down key to start the phone in fastboot/bootloader mode.
Step 5. Open the HWOTA folder on your computer and execute the update.bat file as administrator (this only works on Windows).
Step 6. The updater tool will ask you to reboot the phone in fastboot mode. As you’ve already done that (step 4), press the Enter key to continue.
Step 7. The script will replace your phone’s recovery and tell you to reboot into TWRP mode – just disconnect the USB cable, power the device off and then hold Volume up + Power for a few seconds to enter TWRP recovery.
Step 8. Now, reconnect the USB cable and press the Enter key twice on your computer.
Step 9. For the update source, type 1 and press Enter.
Step 10. Next, type 1Â and hit the Enter key twice to confirm the selection of update type.
Your phone should now automatically reboot into its stock recovery and start the update installation. You can now safely disconnect the USB cable at this stage.
Like this post? Hit the share buttons below to share this article with your friends on Facebook, Google+ and Twitter.